BT501 DHC
Professional tester: Battery 6-12V Starter 12-24V Alternator circuit 12-24V Easy to use, very fast and accurate.
With integrated printer.
Testing the battery
Able to test 2 types of lead batteries :
▪ Maintenance free VRLA/GEL/AGM/SPIRAL ▪ Open batteries SLI
=> From 7 to 230Ah
Multi-standard
Standard SAE: 40 to 2000 A
Standard DIN: 25 to 1300 A
Standard IEC: 30 to 1500 A
Standard EN: 40 to 2100 A
Standard JIS : Battery type number (Japan)
Single and patented tester thanks to its technology of measure of dynamic strength:
▪ Minimisethebatterydischarge
▪ Displays are liable and actua lresults,not distorted by:
- The surface charge (usual necessary time before measure for stabilisation of the electrolyte and of the active materials)
- Auxiliary consumptions (lights, miscellaneous indicators...)
- Contact defects (battery terminals / lug oxidation, lugs not tightened)
Test:
▪ Without disconnecting the battery from the vehicle ▪ Orona separate battery
The test can be done even on a highly discharged battery (from 1,5 V)
Protected against polarity inversions
Instantaneous analysis (result within 2 seconds)
▪ WithdigitaldisplayonLCDscreen:
- Battery voltage (1,5V ► 30V)
- Available starting power (actual or in %) - State of the battery
▪ Immediate printing of results thanks to the integrated printer
Automatic temperature compensation
Tests the starting voltage.
Tests the no-load and charging voltage as well as
the charging current ripple.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
