Launch Battery Tester
Launch Battery Tester
• Battery tester is a basic tool for auto service and repair.
• It is a routine to test the battery by battery tester before making
the diangosis by diagnosis tool, because a bad battery can cause
problem with auto on-board communication system, and affect
the auto diagnosis result.
Features
In addition to Battery test, it tests the car Electrical System as well
Perform battery test on and off the vehicle, no internal battery
required
Can be connected to any PC via USB cable to print and store the test
results,
Company header and footer can be added to Test Report
Click HELP key for step by step operation guide and LCD backlight
User friendly handheld device with 170cm cable for running test from
drivers seat
English and German version
Specifications
Suitable battery type:all types of 12 Volts Automotive Battery
Operating voltage:9V ~ 15V DC (Max.)
Battery analyzing time: < 5 seconds
Analyzing capacity (Amps):
- CCA: 100 ~ 1700 Amps
- IEC: 100 ~ 1700 Amps
- JIS#: 100 ~ 1700 Amps
- EN: 100 ~ 1000 Amps
- DIN: 100 ~ 1000 Amps
Functions
1. Battery Test
Test results on battery conditions:either Good or Replace
Battery state of charge:digital display in Volts
Battery cell resistance measurement:display in m ohm
Battery life expectancy:display in percentage (%)
Key in actual battery rating (CCA,SAE,DIN,EN,IEC or JIS#) before test for better
accuracy
2. Ground Test
Quick and easy checking of engine and chassis ground with display of results and
recommendation after test
3. Starter Test
Quick and easy cranking test to determine the battery cranking power and results will
be displayed after test
From the test results given,you can determine whether the battery has aged,bad
connections or starter problem
4. Alternator Test
Check the charging conditions of the alternator during electrical loading @2000rpm
and without electrical load @3000rpm with results and recommendations display
after test
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: