JLR Service Interval Reset Dongle

 

JAGUAR LAND ROVER  Service Interval Reset (SIR) Dongle

 

The only one in the World approved by Jaguar Land Rover

 

What is it and why do i need it?

• The only Jaguar Land Rover OEM approved Service Interval Reset device in the World
• In use by JLR dealers throughout the UK but now on sale by Maverick to the Aftermarket
• Covers ALL the latest Land Rover cars from 2005 onwards including Disco 4 and even New Evoque (see coverage below)
• Covers New Jaguars as well (see coverage below)
• Removes the service interval warning from the Instrument Cluster in 10 seconds!
• Saves time and money compared to IDS/SDD or other aftermarket tools
• Easy to use with simple user interaction – No Buttons to press or software to install – Just Plug n Play!
• Stand-alone operation, no need to use IDS/SDD or a PC/Laptop
• Easy to update for new vehicle and model years via PC (PC application and cable inc.)
• Uses VIN number ID to determine Reset period automatically – No settings to adjust
• Resets Service Interval even if it has gone way past the reset date. Other aftermarket scantools cannot always do this function

JLR SIR Coverage table

Jaguar & Land Rover Vehicle Coverage Service Interval Reset
Vehicle / Model Year	MY05	MY06	MY07	MY08	MY09	MY10	MY11	MY12
Defender	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Discovery  / LR3 / LR4	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Range Rover Sport	-	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Freelander / LR2	-	-	Yes	Yes	Yes	Yes	Yes	Yes
Evoque	-	-	-	-	-	Y-	-	Yes
XJ - New	-	-	-	-	-	Yes	Yes	Yes
XJ - Old						-	-	-
XK - New	-	-	-	-	-	-	-	-
XK - Old	-	-	-	-	-	-	-	-
XF	-	-	-	-	-	Yes*	Yes*	Yes*
S-Type						-	-	-
X-Type	-	-	-	-	Yes**	-	-	-
	(Yes) - Covered for MY	(-) - N/A	(Yes*) - Oil Service,  Reset, only on 3L Diesel	(Yes**)  - 2.2 DPF only

 

What does the DA-Dongle SIR do?

The DA-SIR Dongle connects directly to the vehicle OBDII (diagnostic) connector and is a stand-alone product that requires no other cables, software or laptop during operation.  The device does not need to be used with  OEM JLR IDS/SDD software. Once connected to the OBDII connector it will perform the Service Interval Reset via diagnostic communication to the Instrument Cluster module. This will remove the service warning from the Instrument Cluster and reset the counter in preparation for the next service interval. It will even reset Service Interval lights that are way past their due date

How does the DA-Dongle work?

The DA-Dongle SIR device is simple and easy to use.
Connect the SIR device to the vehicle OBDII connector (the device powers from the vehicle).
The device enters trigger mode – flashing red/green status (STS) LED. 
The trigger is for the operator to switch on the vehicle ignition.
The application begins to run, this is shown by a green flashing status (STS) LED.  Once complete the status (STS) LED turns solid green and the device omits a constant high- pitched audible tone to ensure the operator removes the device from the vehicle.  
The task complete approximately within 10 Seconds.

How does the DA-Dongle get updated for future Model Years and New Vehicles?

The DA-Dongle can be updated simply and easily by connecting the DA-Dongle to a laptop/PC via the USB cable that is provided with each DA-Dongle.
A PC software update application is available to download from the Maverick Technology website This application once downloaded and launched will be responsible for identifying what version of software is on the device, and whether a new  version is available for update. By connecting the device to the PC when the software update application is running, the application will read the device and connect over the internet to determine if an updated software  s available and download this to the device if a newer version exists.  This process takes  approximately 3 minutes to complete.  The device will then be updated and ready to be used on all the latest vehicles.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: